Zhangjiagang He Li Machinery

No. 27 construction road, Nanfeng Town, Zhangjiagang
Tel: 0512-58611988
Fax: 0512-58903579
Service Hotline: 0512-58903989

您当前所在的位置:首页  > Products  > pipe benders  > CNC automatic pipe bending machine  

SB-38CNC automatic pipe bending machine

 

 

Performance characteristics:           

1, the use of touch screen, numerical control module, dialogue operation, program setting easy.           

2. The structure of the bed is stable, and it is not easy to deform.           

3, each file can set 16 curved pipe angles, and the memory can be stored and stored in 560 sets of files.           

4, set up the positioning function slowly, the repetition accuracy is up to 0.1 degrees           

5, the error message is displayed on the screen, helping the operator to remove it immediately.           

The CNC pipe bending machine has the following characteristics in the field of control.           

1. Electronic control system: the famous Japanese controller. For example: MITSUBISHI company produced the Yaskawa servo driver, servo motor, positioning module, CPU... Etc...., high performance, good stability.           

2, MITSUBISHI super large CPU can accommodate 400 groups of file editors. If insufficient, can buy transfer software installed in the computer, the file is stored on disk, unlimited expand edition groups.           

3, the industrial computer type WINDOWS operating system is matched with the MITSUBISHI server service system. In addition to MITSUBISHI servo drive advantages, the convenience of file management more WINDOWS operating system. Files can also be stored in hard disk or soft disk magnetic sheet, unlimited number of expanded editing groups.           

4, with automatic detection error and fault function, and display on the screen, it makes the operator easy to exclude obstacles.           

5. All processing data are input from the touch screen.           

6, each arm can be a different material because of bending set compensation value, speed, release clearance.           

7, with a pipe bend can separate each write 5 action sequence, 10 speed, allows the operator to use collocation. Improve the working efficiency and reduce the interference point of the pipe.           

8. The touch screen can be switched in both English and Chinese. It shows that the language of his language can also be ordered in accordance with the demand.           

9. The feeding method can be sent or pinching for different needs.           

10. The connection printer can print out the information shown on the screen.           

11, the feeding location, safety location, interference location and location of the guided mode interference can be adjusted manually and automatically, and the loss of human error and machine collision can be eliminated.           

12, the feed shaft will be automatically detected before the action, to avoid collision with the machine.

 

Project model
SB-38CNC
Maximum applicable carbon steel pipe           
An example of the bending radius 1.5D
 
Φ38 x 2.0t
Maximum feed travel (b)
2000mm
Feeding mode
Direct delivery
Maximum bending radius
 
180mm
Maximum bending angle
185°
The number of pipes for each pipe
16 bend
Can set the document file number sense of taste fittings
200
Working speed
Bend speed
Max.30 degree / sec
Tube speed
Max.180 degree / sec
Feed speed
Max.700mm/sec
Fine degree
Bending angle
±0.1°
Tube angle
±0.1°
Feed length
±0.1mm
Data input mode
Work value (Y.B.C)
Power of rotating tube servo motor
750KW
Feed servo motor power
1KW
Oil pressure motor horsepower
10HP
Machine weight (kg)
1400KG
Machine size (CM)
380 x 130 x 75

 

 

Return Back Home    |   Home    |   Company    |   Products    |   Contacts
Zhangjiagang He Li Machinery  Copyright©   Technical Support: Gangcheng Design   
Friendly Link: hospital elevator dumbwaiter elevator home elevator panoramic elevator passenger elevator elevator lift VAM PVA vinyl acetate monomer polyvinyl alcoholx